Low Flotation Processing Machine Flotation Machine Price Mining Flotation Cell

Basic Info

Model NO.	KYF1-38
Warranty	2 Years
Color	Multi Color
Customized	Customized
Condition	New
Product Name	Mining Flotation Cell
Factory	Henan Hongke Heavy Machinery
Function	Selection of Coal Stone, Talc, Gold, Copper, Lead
Capacity	0.2-38 M3/Min
Installation	Engineer Guidance
After-Sales Service Provided	Overseas Service Center Available
Raw Material	Zinc Ash, Copper Ash, Alumina Ash
Application	Mining Concentration
Transport Package	Container
Specification	KYF1-38
Trademark	Hongke
Origin	China
HS Code	84741000
Production Capacity	50 Units Per Month

Product Description

Low Flotation Processing Machine Flotation Machine Price Mining Flotation Cell

1.Product Description of Mining Flotation Cell

Product Name	Mining Flotation Cell
Suitable for	coal, stone, ore, zinc ore, copper ore, gold ore
Color	Customizable

Mining Flotation Cell is composed of slurry tank, mixing device, inflatable device, discharge mineralized bubble device, motor and so on. Suitable for the selection of coal stone, talc and other materials. In addition, according to statistics, more than 90% of non-ferrous minerals are treated by flotation machines, as well as the coarse separation and selection of ferrous, precious and non-metallic minerals. At the same time, the purification of water quality has been widely used. Therefore, flotation machine get more attention to the equipment in flotation, mineral processing and other production process. Compared with other equipment methods, flotation machine is more economical and reasonable, and the effect is very good.

 

2. Working Principle of Mining Flotation Cell

In the stirred flotation machine, with the rotation of the impeller, the slurry in the tank is sucked from the lower end of the impeller to the impeller blade from around the bottom of the groove. At the same time, the low pressure air from the blower passes through the air distributor of the hollow shaft and impeller. After the slurry and air are fully mixed between the blades, they are pushed from the upper half of the impeller to the peripheral syncline, and the stator stabilizes and orientates into the whole slot. The bubble rises to the stable zone of the foam. After the enrichment process, the foam overflows from the overflow Weir and enters the foam tank. A part of the slurry flows to the lower part of the impeller, then stirred by the impeller, remixed to form a mineralized bubble, and the remaining slurry flows to the next Trough until it becomes tailings.

3. Features and Factory Pictures of Mining Flotation Cell

a. Separation precision is high, the clean coal ash content is low, the yield is high, especially for the difficult coal separation more obvious advantage, the clean coal ash content is 1~2% lower than the conventional mechanical stirring flotation machine ;
b. Treatment capacity is large, unit volume treatment capacity is 2~3 times than that of conventional flotation machine;
c.The operation cost is low, compared with the conventional mechanical mixing flotation machine can save 1/3~1/2;
d. Impeller with rear tilting double-sided blade, can realize double circulation of slurry in tank;
e. Large suction volume, forward tilt groove, small dead angle, fast foam movement;
f. impeller circumference speed is low, impeller cover plate life is long, the slurry carries on the upper and lower double circulation according to the fixed way, is good for the coarse grain mineral suspension;
g. Operation is simple and automation is high.

4.Size Information of Mining Flotation Cell

Model		KYF-1	KYF-2	KYF-3	KYF-4	KYF-8	KYF-16	KYF-24	KYF-38
Tank Size	L(mm)	1000	1300	1600	1800	2200	2800	3100	3600
	W(mm)	1000	1300	1600	1800	2200	2800	3100	3600
	H(mm)	1100	1250	1400	1500	1950	2400	2900	3400
Weight(kg)		1056	1419	1885	2206	3600	5900	9830	15097
Effective Volume(m3)		1	2	3	4	8	16	24	38
Production capacity (based on slurry volume)(m3/min)		0.2-1	0.4-2	0.6-3	1.2-4	3-8	4-16	4-24	10-38
Main shaft motor	Model	Y132M1-6	Y160M2-8	Y160L-8	Y180L-8	Y200L-8	Y250M-8	Y250M-8	Y280S-8
	Power (kw)	4	5.5	7.5	11	15	30	30	37
	Speed (r/min)	960	720	720	970	730	730	730	740
Impeller	Dia.(mm)	340	410	480	550	630	740	800	880
	H(mm)	215	256	300	340	390	460	-	545
	Speed (r/min)	281	247	219	200	175	160	150	138
	Circular Velocity (m/s)	5	5.3	5.5	5.76	5.77	6.7	6.25	6.36
Scraper motor	Model	Y90S-4	Y90S-4	Y90L-4	Y90L-4	Y90L-4	Y90L-4	Y90L-4	Y90L-4
	Power (kw)	1.1	1.1	1.5	1.5	1.5	1.5	1.5	1.5

5. Working Sites of Mining Flotation Cell

 

6.Company Introduction
Henan Hongke Heavy Machinery is located in Henan Province which is the cultural base of the central area of China. We are a mining machinery manufacturing enterprise that integrates scientific research, production and marketing.We are a high-tech enterprise that specializes in the research and production of rotary kilns, dryers, crushers and so on, such as new type of lime rotary kiln, ceramsite kiln, zinc oxide rotary kiln, sludge rotary kiln, chemical rotary kiln, metallurgical rotary kiln, Raymond mill, ultra-fine mill, large and medium dryer, ball mill, sand mill,stone production line, mineral processing equipment and so on.From the design, production, installation and debugging, we provide you the entire tracking service.We adhere to the aim of high quality to survive, good credibility to make development, and sincerely look forward to cooperating with you!

 

7.FAQ
1. What is the minium order quantity?One set.2.How long is the warranty period?One year. Wearing parts are excluded.3. What is the after-service of your company?We can provide the customers foudation drawing, installation service, work training as well as other service according to thecustomer's requirements.4.How long is the delivery time?About 15 days after we receive the payment.5. What are the payment terms?T/T, L/C are the best, it can be adjustable according to different situations.--------------------------------------------------------------------------------------
Kindly Note:
1. Please pay attention to the capacity. It's what you must take into consideration in choosing a suitable machine.2. Please Inform us the follow figures:1). What is the raw material?2). What is initial size and final size after griding?3). Capacity ( t/h)
Upon we got your message we shall give you our favorable offer in short time.