Flotation Cell Machine Zinc Flotation Cell for Zinc Separating

Basic Info

Automation	Automatic
Warranty	24 Months
Condition	New
Transport Package	Standard Exporting Packing
Trademark	Yuhui
Origin	China
Production Capacity	40 Sets/Month

Product Description

flotation cell machine zinc flotation cell for zinc separating

Flotation machine, flotation equipment is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed.

Features of Flotation machine:

The Floatation Machine has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.

Flotation machine working principle:
The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.

Flotation machine technical parameters:

Type	volume m3/trough	Blade diameter (mm)	Capacity (m3/min)	Rotation Speed (r/mim)	Power (kw)	Dimension single trough (mm)	Weight t/trough
XJK-0.35	0.35	300	0.15-0.5	470	2.2	700×700×700	0.45
XJK-0.62	0.62	350	0.3-0.9	400	3	900×900×850	0.85
XJK-1.1	1.1	500	0.6-1.6	330	5.5	1100×1100×1000	1.4
XJK-2.8	2.8	600	1.5-3.5	280	11	1750×1600×1100	2.43
XJK-5.8	5.8	750	3-7	240	30	2200×2200×1200	3.53
XJC-4	4	700	3-6	190	10	1700×1700×1600	3.1
XJC-8	8	900	4-8	170	22	2200×2200×1800	3.95
XJQ-40	4	400	2-5	290-315	11	1600×2100×1350	3.3
XJQ-160	16	700	8-20	170-180	37	2800×3800×1700	9.46

Note: All parameters above are just for reference, any question please do not hesitate to contact me. welcome to call or email at us.