Zenith Flotation Cell for Gold Ore Separation Mining Machinery

Basic Info

Model NO.	BF Series
Energy Saving	Energy Saving
Warranty	1 Year
Color	Grey
Customized	Customized
Condition	New
Spare Parts Supply	for Whole Year
Test&Installation	Engineer Assigned
After-Sale Service	for Whole Using Life
Export Markets	Global
Transport Package	Container, Nude Packs, in Bulk
Specification	ISO9001: 2000
Trademark	Zenith
Origin	Shanghai Zenith, China
HS Code	8474209000
Production Capacity	1000 Set/Year

Product Description

Zenith flotation cell for Gold Ore separation Mining Machineryflotation cell introduction flotation cell have three different types, the following is details of each type: flotation cell for Gold Ore separation Mining Machinery:
flotation cell process is one of the most widely used methods to process lode gold in gold beneficiation plant. In most instances, flotation cell is used for processing sulfide minerals gold ores with high flotability and the effect is most notable.1. General processPrimary Crushing----Secondary Crushing----Sieving----Third Crushing-----Grinding--- Classifying-----Flotation Separation----drying---- Concentrated ore 2. Applicationflotation cell is used for upgrading ores. After this process, the value of final concentrated powder will be greatly improved. Our basic process is crushing, grinding, sieving, flotation separating and dewatering. The specific process is different according to ore, site and customers' requirements. Mining gold ore first preliminary crushing by jaw crusher, crushing to a reasonable degree of fineness via hoist feeder evenly fed into the ball mill, ore crushing, grinding by ball mill.After a ball mill grinding of ore fines go to the next step:classification.Spiral sorting machine by means of the proportion of solid particles precipitated in the liquid at different speeds principle,the ore mixture enters the grading machine washing,grading. After washed and graded mineral mixture through the flotation cell, Adding different drugs through the flotation machine after the initial separation of the mineral particles in the flotation machine is fed, depending on the mineral characteristics,so that the minerals and other substances to be separated.After the desired minerals are separated out, because the preliminary concentrated containing a lot of water,subject to the concentrator, and then through a dryer to obtain dry minerals.

flotation cell :flotation cell principle is that: using gravity separation to recover gold and all kinds of associated heavy minerals from the ore mineral sands as much as possible. Then gravity separation, flotation, mercury mixing, magnetic separation and electrostatic separation are combined to separate the gold and all kinds of heavy minerals, which can reach the purpose of comprehensive recovery. gold gravel mine beneficiation can be classified into crushing and sieving, desliming and beneficiation. Practice proves that the gravity separation method is the most effective and the most economic method for processing alluvial gold mine. For the different grain size composition in alluvial gold, all kinds of gravity separation equipments have different effective grain size limits in materials processing, so reasonable alluvial gold beneficiation process should be the combined work by several gravity separation equipments.
Gold concentrate are got by through coarse beneficiation. Its gold content is 100 g/tons and heavy sand minerals are 1 ~ 2 kg/tons or more. For coarse concentrates that includes gold, there are three kinds of processing methods:
1. Using batea, the gold grains are dressed out in manual work and the heavy sands are abandoned.2. Using mercury mixing tube for mercury mixing, the calomelene is got and the heavy sand aren abandoned.3. Using manual work and mercury mixing for gold extraction, the heavy sands are sent to concentration plants. All kinds of heavy sand minerals can be recycled in magnetic separation and electricity separation.

flotation cell Process Plant: flotation cell is widely used for recovery of gold from cyanide solutions. The process can be applied to clean solutions through fluidized bed adsorption columns, or directly to leached ore slurries by the addition of carbon to agitated slurry tanks, followed by separation ofthe carbon from the slurry by coarse screening methods.Gold cyanide is adsorbed into the pores of activated carbon, resulting in a process solution that is devoid of gold. The loaded carbon is heated by a strong solution of hot caustic and cyanide to reverse the adsorption process and strip the carbon of gold. Gold is then removed from the solution by electrowinning. Stripped carbon is returned to adsorption for reuse.
The major advantage of carbon-in-pulp recovery over Merrill Crowe recovery is the elimination of the leached ore solids and liquid separation unit operation. The separation step typically involves a series of expensive gravity separation thickeners or continuous filters arranged for countercurrent washing or filtration of the solids. For ores exhibiting slow settling or filtration rates, such as ores with high clay content, the countercurrent decantation (CCD) step can become cost prohibitive. Ores with high silver content will generally suggest that Merrill-Crowe recovery be used. This is because of the very large carbon stripping and electrowinning systems required for processing large quantities of silver. Carbon-In-Pulp (CIP): Carbon-in-pulp operation is a variation of the conventional cyanidation process. Ore is crushed, finely ground, and cyanide leached in a series of agitated tanks to solubilize the gold values. Instead of separating solids from the pregnant solution, as in the traditional cyanidation process, granular activated carbon is added to the leached slurry.
The carbon adsorbs the gold from the slurry solution and is removed from the slurry by coarse screening. In practice, this is accomplished by a series of five or six agitated tanks where carbon and ore slurry are contacted in a staged countercurrent manner.

This greatly increases the possible gold loading onto the carbon while maintaining a high recovery percentage. Carbon is retained within the individual CIP tanks by CIP tank screens. The opening size of the CIP tank screens is such that the finely ground ore particles will pass through the screens,but the coarse carbon will not. Almost every imaginable type of screen has been tried for this application, with some types being much more successful than the rest. 1.Feeder 2.Jaw crusher, cone crusher 3.Vibrating screen 4.Belt conveyors 5.Ball mill 6.Spiral classifer 7.Hydrocyclone 8.Thickener 9.Leaching Tanks 10.Electrowinning and desorption device 11.Gold smelting furnace.
We can supply the whole line of flotation cell including:a. crushing system b. grinding and classification system c. leaching system d. desorption and electrowinning device e. gold smelting system

Main machine in flotation cell parameters:flotation machine:

Model	Effective volume (m³)	L x D x H (mm)	Diameter of impeller (mm)	Circular velocity of impeller (m/min)	Air suction amount (m³/ .min)	Motor power (kw)	Capacity (m³/min)	Weight Of single tank (kg)
BF-0.25	0.25	650x600x700	250	6	0.9-1.05	1.5	0.12-0.28	370
BF-0.37	0.37	740x740x750	286	7.2	0.9-1.05	1.5	0.2-0.4	470
BF-0.65	0.65	850x950x950	300	7.35	0.9-1.10	3	0.3-0.7	932
BF-1.2	1.2	1050x1150x1100	450	7.02	0.9-1.10	5.5	0.6-1.2	1370
BF-2.0	2	1400x1450x1120	500	7.5	0.9-1.10	7.5	1.0-2.0	1750
BF-2.8	2.8	1650x1650x1150	550	8.06	0.9-1.10	11	1.4-3.0	2130
BF-4.0	4	1900x2000x1200	650	8	0.9-1.10	15	2.4-4.0	2585
BF-6.0	6	2200x2350x1300	700	7.5	0.9-1.10	18.5	3.0-6.0	3300
BF-8.0	8	2250x2850x1400	760	7.5	0.9-1.10	22	4.0-8.0	4130
BF-10	10	2250x2850x1700	760	7.52	0.9-1.10	22	5.0-10	4500
BF-16	16	2850x3800x1700	850	8.7	0.9-1.10	37	8.0-16	8320
BF-20	20	2850x3800x2000	850	8.7	0.9-1.10	45	10.0-20	8670
BF-24	24	3150x4150x2000	920	8.7	0.9-1.10	45	12.0-24	8970

JT Sawtooth Wave Jigger

Model		JT-0.57	JT1-1	JT2-2	JT3-1	JT4-2	JT5-2
Jigging Chamber	Section Form	Trapezium	Trapezium	Rectangle	Trapezium	Rectangle	Trapezium
	Length*Width(mm)	450~750×950	450~900×1500	1070×1070	960~2000×1950	1510×1510	1200~2000×3150
	Column Number	Single	Single	Single	Single	Single	Single
	Jig Chambers(psc)	1	1	2	1	2	2
	Single chamber area ()	0.57	1	1.14	3.3	2.43	2.12(single chamber) 2.77(double chamber)
	Total area()	0.57	1	2.28	3.3	4.86	5
Stroke Coefficient		0.57	0.64	0.45	1	0.58(single power) 0.45(dual power)	0.58(single power) 0.45(dual power)
Max feed size(mm)		6	5	10	<20	8, plus sieve automatic discharge <60	8, plus sieve automatic discharge <60
Capacity(t/h)		1~2.5	2~3	4~8	10~15	12~16	10~20
Water Consumption(m³/h)		1~2	2~3	2~4	3~6	4~8	5~10
Separator	Stroke(mm)	12,17,21	12,17,21	12,17,21	10~47 adjustable	10~30	15,20,25
	Jig frequency(min-1)	60~156 adjustable	60~156 adjustable	60~156 adjustable	80~100 adjustable	80~120 adjustable	80~120 adjustable
Motor	Model	YCT 132-4B	YCT 100L-6	YCT32-4	YCT-4B	YCT 160-4B	YCT 200-4A
	Power (kw)	1.5	2.2	3	5.5	5.5 (dual power) 7.5 (single power)	5.5 (dual power) 7.5 (single power)
Overall Dimension(Length*Width*Height)mm		1530×780×1550	2060×1112×1890	2870×1520×1880	2662×2000×3030	4240×1990×2750	3940×2006×2580
Weight(kg)		612	989	1637	3260	3500	3854
Notes: The above data is only for your reference, capacity and hutch water varying from ore granularity, ore property and operating condition.